rhino pd-200 hammer
rhino pd-200 hammer accessories
rhino pd-200 hammer insides
Rhino Hammers

Rhino "PD-200" Pneumatic Post Driver

Rhino

Regular price $0.00 Sale

The PD-200 Heavy Duty Post Pounder is the perfect choice for driving Beams, Round, Square or Rectangular Tubing, Wood Posts, Stakes or any shape up to 12 ".

Note: If the post you intend to drive is tubular in construction and the inside dimension is larger than 3.5", you will need to use a drive cap. Please call us for assistance in determining your needs.

The PD-200 Heavy Duty Post Pounder is the perfect choice for driving Beams, Round, Square or Rectangular Tubing, Wood Posts, Stakes or any shape up to 12 ".

Note: If the post you intend to drive is tubular in construction and the inside dimension is larger than 3.5", you will need to use a drive cap. Please call us for assistance in determining your needs.

1

Heavy Duty Post Driver with a 5 1/2" (139.7 mm) I.D. Master Chuck, uses 72 CFM (2.04 m3/min) @ 100 psi (7 kg/cm2). Approx. Wt. 200 lbs (90.7 kg)

Heavy Duty Post Driver with a 7" (177.8 mm) I.D. Master Chuck, uses 72 CFM (2.04 m3/min) @ 100 psi (7 kg/cm2). Approx. Wt. 200 lbs (90.7 kg)

2 1/2" (63.5 mm) I.D. Chuck Adapter for 5 1/2" Master Chuck (not shown)

2

3 1/8" (79.4 mm) I.D. Chuck Adapter for 5 1/2" Master Chuck

3

3 3/4" (95.3 mm) I.D. Chuck Adapter for 5 1/2" Master Chuck

4

4 1/4" (107.9 mm) I.D. Chuck Adapter for 5 1/2" Master Chuck

7" (177.8 mm) I.D. Master Chuck (not shown)

2 1/2" (63.5 mm) I.D. Chuck Adapter for 7" Master Chuck (not shown)

3 1/8" (79.4 mm) I.D. Chuck Adapter for 7" Master Chuck (not shown)

3 3/4" (95.3 mm) I.D. Chuck Adapter for 7" Master Chuck (not shown)

4 1/4" (107.9 mm) I.D. Chuck Adapter for 7" Master Chuck (not shown)

4 3/4" (120.7 mm) I.D. Chuck Adapter for 7" Master Chuck (not shown)

5 1/4" (133.4 mm) I.D. Chuck Adapter for 7" Master Chuck (not shown)

5 3/4" (146.1 mm) I.D. Chuck Adapter for 7" Master Chuck (not shown)

5

4" x 6" (101 mm x 152 mm) H Column Chuck

6

4" x 6" (101 mm x 152 mm) H Column Driving Cap

7

4" x 4" (101 mm x 101 mm) Wood Post Chuck for 5 1/2" Master Chuck

Top Cover

Ductile iron casting, high in strength and ductility has 1" (25.4 mm) diameter handles with chain loop designed into the cover for easy handling and carrying. O-Ring sealed.

Body

Ductile iron casting, with excellent wear resistant characteristics. The air inlet is cast into the body and tapped with 3/4" NPT female threaded ports, along with 1" (25.4 mm) diameter side handles for easy handling. Chuck bolts pass thru the lower body flange into tapped holes in the chuck mounting plate allowing special chucks to be made in a wide variety of shapes and sizes.

Piston

Alloy steel heat treated with a ground surface with hard chrome plate. Designed with 2 round valve ports to give better lubrication and load distribution to the valve ring while running.

Master Chuck and Chuck Adapters

The 5 1/2" (139.7 mm) and 7" (177.8 mm) I.D. master chucks are of an all welded, reinforced steel and tubing construction. The chuck is equipped with extra long chuck adapter attachment lugs. Standard chuck adapters are available in a variety of sizes. See below.

Fasteners

S.A.E.Grade 8 bolts with belleville lock washers. All fasteners are plated.

Air Consumption

72 CFM (2.04 m3/min) @ 100 PSI (7 kg/cm2)